Instructions

1) Remove the battery cover under the mask. 2) Insert two AA batteries in the right positions. 3) Snap the battery cover back in place. Please call 301-799-5288 or email ada@cleanairtek.com for further assistance.
1) To charge, plug the cable into the MICRO USB port under the mask. The port can be pointed to a power bank, USB outlet, laptop, car put, train, and airplane with USB power. Please call 301-799-5288 or email ada@cleanairtek.com for further assistance. 1) VELCRO straps wrap wrong the head and ear first. 2) BUTTON straps wrap above the head to prevent the mask from weight down on your ears. There are two clippable buttons to secure the mask to your head. Please call 301-799-5288 or email ada@cleanairtek.com for further assistance.
First part of the image shows the location of the button - right beside the micro USB charging port. Second part of the image shows how the button looks when its turned on and off. You must push the button to turn it on and push it again to turn it off. The button is pushed in when the mask is on and out when its off. 1) The button switch is located at the bottom of the mask. 2) Push the button in to turn on the mask. 3) Push the button again to turn off the mask. Please call 301-799-5288 or email ada@cleanairtek.com for further assistance.
1) Use clean water and dampen a cloth. Feel free to spray water on the straps. 2) With a damp cloth, wipe the exterior of mask (straps, silicone gasket, frame, bottom). 3) Use alcohol wipes if needed. Warning : avoid wiping near the filter area. Do NOT use disinfectant wipes. Please call 301-799-5288 or email ada@cleanairtek.com for further assistance. This image gives information about how the mask filters are to be changed along with the location of the filter cover and how to remove it. The first image shows the filter grid cover located at the bottom of the mask. The second image shows the filter and the cover. 1) Remove the filter grid cover under the mask. 2) Slide and fit the HEPA/Near-HEPA filter in the slot. 3) Locking the filter cover : while firmly pressing down on the cover with your thumb, push the flap outward until an audible click is heard. Please call 301-799-5288 or email ada@cleanairtek.com for further assistance.